close

Sammic undertakes major warewasher revamp

Sammic x-50 crop
Sammic’s X-50 can now operate with both single phase and three phase current.

In response to market requirements, Sammic has adapted its front-loading X-50 and S-50 dishwashers.

From now on these models will be multi-power: connected to single phase current, they provide a rinsing power of 3,000W and with three phase this power rises to 4,500W.

The X-50 and S-50 have three wash cycles, a display showing the wash and rinse temperatures, and are equipped with option of thermal shutdown. In addition, they are multi-phase dishwashers, and can be connected to 230V/50Hz/1~ (by default), 400V/50Hz/3N or 230V/50Hz/3~. Both the X-50 and the S-50 are available with drain pumps and/or descalers.

Story continues below
Advertisement

Furthermore the manufacturer has revised the design of its P-41 glasswasher, which will now be known as the P-41S.

Said to be equipped with a more powerful washing pump and with a top washing arm, the glasswasher has baskets of 40x40cm. In the firm’s Pro electromechanical range, the unit can also be used as a compact dishwasher for small yields.

With one single wash cycle and maximum glass height of 280mm, the P-41S glasswasher is also available equipped with a drain pump and non-return valve.

Additionally, Sammic’s Pro P-50 range of electromechanical undercounter dishwashers is now available with a drain pump and non-return valve.

This model, with one single wash cycle and a maximum glass height of 330mm, is claimed to be intuitive to operate.

Distributor demand has prompted the manufacturer to give this model a drain pump, making it suitable for locations where the drain is higher than 120mm.

Tags : dishwashersglasswashersSammicwarewashers
Clare Nicholls

The author Clare Nicholls

Leave a Response

Protected with IP Blacklist CloudIP Blacklist Cloud